日本SMC两通电磁阀阀形式

日本SMC两通电磁阀阀形式

注1）的“L"选项是无油处理。
注2）的流体的动态粘度必须不过50毫米2 /秒。
电枢的特殊构造中采用的内置全波整流型通过在提供间隙给出OFF反应的改进
表面吸收，当它被接通。

选择直流规范。或交流规范。内置全波整流型时的动态粘度比水高，或当断开响应被先。
注3）线圈绝缘型H级：AC规范。只要
注4）螺母（非潮湿部件）都是镀镍的黄铜（C37）的材料。
注5）是附连到DC规范没有遮光线圈。或AC规格内置全波整流式。
*请与本公司时，流体除以上使用。

日本SMC两通电磁阀阀形式

Note 1) “L" option is the oil-free treatment.
Note 2) The dynamic viscosity of the fluid must not exceed 50 mm2/s.
The special construction of the armature adopted in the built-in full-wave rectifier type gives an improvement in OFF response by providing clearance on the
absorbed surface when it is switched ON.
Select the DC spec. or AC spec. built-in full-wave rectifier type when the dynamic viscosity is higher than water or when the OFF response is prioritized.
Note 3) Coil insulation type Class H: AC spec. only
Note 4) The nuts (non-wetted parts) are nickel-plated on the Brass (C37) material.
Note 5) There is no shading coil attached to the DC spec. or AC spec built-in full-wave rectifier type.
? Please contact SMC when fluids other than above are used.