日本SMC阀岛传送系统

日本SMC阀岛传送系统 

注1）这是一个规范来传输的阀电源和输入块保险丝熔断的电压降的诊断信息作为输入数据提供给
高手。 EX250-SDN1成为I / O连接时检测诊断信息的时候，而不是EX250-SDN1-X102。
由于这是一种特殊的产品，未的歧管部件数。请咨询SMC为集成块集成式。
注2）请注意，版本是可能会改变。
注3）每个文件可以从SMC上下载

日本SMC阀岛传送系统 

注4）由于EX250-SAS7 / 9与1的供电系统兼容，为单元的电源被分成两个：电源，用于传感器和阀门。
注5）由于EX250-SAS7 / 9与1的供电系统兼容，电源必须根据下面的值来划分。 （参阅
2077的细节。）
（EX250-SAS7 ...zui大240毫安，EX250-SAS9 ...zui大120 mA）的
注6）当SI单元安装到歧管的时候发货，配件都与它一起运来。
注7）有关详细规格上述以外，指的是可以从SMC上下载的操作手册Note 1) This is a specification to transmit the diagnostic information of voltage drop of the valve power supply and input block fuse blowout as an input data to the
master. EX250-SDN1 becomes I/O connection time out when the diagnostic information is detected, but not EX250-SDN1-X102.
Since this is a special product, a manifold part number is not specified. Please consult SMC for the manifold integrated type.
Note 2) Please note that the version is subject to change.
Note 3) Each file can be downloaded from SMC website

Note 4) Since EX250-SAS7/9 is compatible with the 1 power supply system, the power supply for units is divided into two: the power supply for sensors and for valves.
Note 5) Since EX250-SAS7/9 is compatible with the 1 power supply system, the power supply must be divided in accordance with the values below. (Refer to page
2077 for details.)
(EX250-SAS7 ··· Max. 240 mA, EX250-SAS9 ··· Max. 120 mA)
Note 6) When the SI unit is mounted to the manifold when shipped, accessories are shipped together with it.
Note 7) For detailed specifications other than the above, refer to the operation manual that can be downloaded from SMC website